"Features

High performance and reliability

Large dual diaphragm capsule for smooth, natural sound and low noise

Three switchable polar patterns: omni, cardioid, figure-of-eight

State-of-the-art surface-mount electronics ensure compliance with Audio-Technica’s stringent consistency and reliability standards

Switchable 80 Hz high-pass filter and 10 dB pad

Very versatile; ideal for voice, percussion, strings, amps, and drum kits

Robust metal construction with enhanced protection grille for excellent protection of the capsule

Dual diaphragm capsule”

The dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use.

“multi-directivity”

The AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings, that give it great versatility, depending on the type of recording and the sound source to capture.

“Switchable low cut and fader”

An integral 80Hz hi-pass filter provides easy switching from a flat frequency response to a low-end roll-off. The high pass position reduces the microphone’s sensitivity to popping in close vocal use. It also reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically-coupled vibrations.

highly versatile

Apart from its multiple directivity, the AT2050 features a low-cut filter and an attenuator to increase the versatility of the microphone.

switchable directivity

You can quickly select the desired directivity (omni, cardioid or figure eight) on the microphone body.

at8458 shock mount

The AT2050 comes with the AT8458 shock mount to ensure stable and flexible positioning.

carry case

The AT2050 comes with a soft protective pouch for easy storage and transport.

Specifications

Element Externally-polarized (DC bias) condenser

Polar Pattern Cardioid, Omnidirectional, Figure-of-Eight, Multi-Pattern

Frequency Response 20 – 20,000 Hz

Low Frequency Roll Off 80 Hz, 12 dB/octave

Open Circuit Sensitivity -42 dB (7.9 mV) re 1V at 1 Pa

Maximum Input Sound Level 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)

Dynamic Range 136 dB, 1 kHz at Max SPL

Signal-to-Noise Ratio 77 dB, 1 kHz at 1 Pa

Phantom Power Requirements 11-52V DC, 4.7 mA typical

Weight 412g

Dimensions 170.0 mm (6.69″) long, 52.0 mm (2.05″) maximum body diameter

Output Connector Integral 3-pin XLRM-type

Accessories Included AT8458 shock mount for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; soft protective pouch"